WOOD FLOOR SANDING AND POLISHING TAREE

You will need to remove personal items and furniture from the room being sanded. For very heavy items like fridges, we can work around them.

We can sand a small job (a single room) in a day while a medium jobs (up to 75 square metres) should take two to three days. The timing for larger jobs is based on the size of the floor and the amount of work required. We’ll speak to you about timing when we’re quoting the job. Staining the floor or doing optional extras such as whitewashing will increase the time by 24 to 48 hours.

It will be ready to walk on the day after we complete the job, but we do recommend wearing socks for the next couple of days. You can return your furniture the next day, but you will need to attach new furniture pads under your furniture to prevent scratching. Heavy wheeled items must be kept off the floor for a week, as well as rugs and other floor coverings.

While many floor sanding companies have a technician and a junior apprentice doing the job, we have a highly skilled two-man crew attending to your floors. Other companies will apply two or three solvent-based coatings, taking a day to dry between each coat. Electrodry uses a rapid-curing two-pack floor coating that lets us apply multiple coats of polyurethane in one day.

In most cases, finding somewhere else will be your most comfortable option. This is especially important if you are pregnant or suffer from asthma, as the smells and noise from our work may be problematic. If your most important rooms aren’t being sanded, you can choose to stay in the house, but it is important to note that you will not be able to access or walk through the rooms being sanded.

At times, there may be odours while we’re applying polyurethane coatings, but these will dissipate quickly. There should be almost no detectable odour within four hours. We use high-quality water-based floor coatings that have rapid curing times and create minimal odours.

The Electrodry dust capture system collects most of the dust we create while sanding. Please be advised that there may still be a light film of dust left on surfaces in the sanding area, but we wipe down the surfaces as part of our process.

We are confident our process can remove most wooden floor damage, but some pre-existing issues may remain or could affect the finish. These include:

1) Deep cuts in your floorboards cannot be sanded out, as the level we would have to sand the boards to would make the floor dangerously thin.

2) Weathered or water damaged floorboards may need to be replaced or may affect the tone and evenness of the end result.

3) Floors stained by urine may still have dark stains after sanding.

Electrodry Taree offers sanding and polishing services for hardwood and engineered wood floors. Engineered floors have a 2-3mm timber veneer over MDF board, which can be safely sanded using our rotary sanding process. It is important to note that engineered floors can only be sanded once.

Electrodry’s Timber Refresh and Timber Restore service is an excellent option for floors with small scratches, are worn, discoloured or have a build-up of dirt and cleaning solutions. Both of these services take just one day and are cheaper than sanding. We find that some floors need more though. Electrodry Wood Floor Sanding is a great option if your floor is seriously scratched or unevenly worn. Please see our Wood Floor Refinishing page for a full comparison about different options for your floor.